邢台厚膜汉高ABLESTIKJM7000导电胶,乐泰导电胶

汉高ablestik JM7000高可靠性导电胶 耐高温导电胶300度

ABLESTIK JM7000耐高温300℃导电胶

乐泰EA 3335透明UV耐热耐水耐腐蚀光通讯光路胶

粘度 5000-7000cp 固化条件 UV 硬度80shoreA Tg值 135℃ CTE,低于Tg温度59ppm/℃ CTE,Tg值温度 ppm/℃

透明，UV快速固化，良好的耐热，耐水，耐化学腐蚀性，低挥发。

TYPICAL PROPERTIES OF UNCURED MATERIAL
Viscosity, HAAKE RV-20 Rotoviscometer, mPa·s (cP):
Cone 1º @ Shear rate 22 s
-1 9,000
Work Life @ 25°C, hours 8 to 16
Shelf Life @ -40°C (from date of manufacture), days 365
TYPICAL CURING PERFORMANCE
Cure Schedule
30 minutes @ 150°C
Suggested temperature cures are from 150 to 350ºC. For
applications requiring higher electrical conductivity, a cure cycle of 15
minutes @ 300ºC is recommended. Product properties will not be
reduced by subsequent post die attach thermal exposure, i.e.,
wirebond, and/or lid seal up to 370ºC.

TYPICAL PROPERTIES OF CURED MATERIAL
Physical Properties
Coefficient of Thermal Expansion, :
Below Tg, ppm/°C 33
Glass Transition Temperature (Tg) by TMA, °C 240
Bulk Thermal Conductivity, W/(m-K):
@ 90°C 1.1
@ 165°C 1.0
Tensile Modulus, DMTA :
Cured 30 minutes @ 300ºC N/mm² 10,000
(psi) (1,450,377)
Extractable Ionic Content, @ 100°C:
Chloride (Cl-) <10
Sodium (Na+) <15
Potassium (K+) <15
Decomposition (in N2):
TGA analysis @ 10ºC/ minute ramp from 25 to 400
ºC
@ 340ºC, % 0.2
@ 400ºC, % 0.3
Electrical Properties
Sample cured 30 minutes @ 300ºC
Volume Resistivity, ohm-cm ≤0.01
Ablestik 84-1LMISR4是一种单组份、低粘度的导电银胶。胶流变性能好，适用于高速die attach封装，无拉丝和拖尾；纯度高，广泛应用在半导体工业主要用于半导体芯片的粘贴，适用于全自动机器高速点胶，是目前世界上出胶速度 快的一款导电银胶。特点 流变性能好，适用于高速die attach封装，无拉丝和拖尾；纯度高，广泛应用在半导体工业.

84-1 LMISR4导电银胶适用于全自动机器高速点胶。Ablebond 84-1 LMISR4导电银胶允许 少量胶分配，并降低停留时间，而无残胶或拉丝的烦恼。

包装规格：5cc 10cc



ABLESTIK 84-1A，84-1LMIT1,84-3等

ABLESTIK 5020 506胶膜

深圳汉高导电胶 西安汉高导电胶 沈阳汉高代理 山东汉高代理 西安导电胶 山东导电胶 广州导电胶 导电胶
ABLESTIK 5020胶膜 绝缘胶膜

广州5020胶膜 深圳汉高5020胶膜 西安ablesitk 5020胶膜 山东ablestik5020胶膜 石家庄导电胶 河北导电胶 上海导电胶