广东订制异丙醇酰胺价格实惠

3、属非离子表面活性剂，溶解力强，实验室称溶蜡剂一般是指异构醇油酸皂DF-20。
4、溶液的除蜡效能与速度，远远优于同类三乙醇胺油酸皂、 6503、维护成本低味道轻！在生产研磨剂；防锈剂等产品中大量使用。

异构醇酰胺6508  易溶于水、的渗透性、乳化性（强亲水基）与增稠性、对油脂中包裹的炭黑、烟尘等颗粒污垢具有良好的分散作用

请注意仔细阅读
    该产品将可能被应用的任何场合，客户通过全面的试验，自我确定您具体应用场合的相宜工艺。提供的配方条件仅作参考，原料及使用量的增减，依需求品质作适当调正，本公司所提供的资料是根据公司现有的技术知识和经验编写的，由于在加工和应用产品的过程中的许多影响因素，因此不排除用户自行试验的必要性与可行性。本资料在法律上也不本产品在某些性质上完全正确，或者对特殊的用途完全适用。而且，如果该产品应用场合需要有关部门的许可或批准，您取得有关的文件

Isomeric alcohol amide 6508 isomeric alcohol amide 6508 is easy to dissolve in water, excellent permeability, emulsifying (strong Hydrophilic Group) and thickening, and has a good dispersion effect on carbon black, soot and other particles in oil and fat! Therefore, it has excellent cleaning effect on heavy oil stain, polishing wax, wax stain, etc.

612/5000
Isomeric alcohol amide 6508 isomeric alcohol amide 6508 is easy to dissolve in water, excellent permeability, emulsifying (strong hydrophilic group) and thickening, and has a good dispersion effect on carbon black, soot and other particles in oil and fat! Therefore, it has excellent cleaning effect on heavy oil stain, polishing wax, wax stain, etc. . Recommended advantages: LOW VOC, low water environmental damage, no phosphorus, do not produce damaging ions, etc. , daily Chemical Grade Standard Parameter Index: Appearance: Pale yellow/yellow transparent viscous liquid (20 °C) Ph: (1% aqueous solution)8-9.5 active matter content (%)99 ± 0.5 hlb value: 13.5 cloud point (high) : 100 °C foam grade: medium packing and storage: 1,200 kg plastic or iron drums 2, storage and transportation by General Chemicals. Store in a dry and ventilated place. Store in a sealed place for 12 MONTHS

Please note that careful reading of the product will likely be applied to any occasion, the customer must pass a comprehensive test, self-determination of your specific application appropriate process. The formula conditions provided are for reference only. The increase and decrease of raw materials and usage amount are adjusted according to the required quality. The information provided by the company is based on the company's existing technical knowledge and experience, due to many factors in the process of processing and application of products, it is necessary and feasible for users to test by themselves