制糖业脱色树脂（精制糖）进口杜笙（Tulsion）A-72MP

使用微信扫描二维码分享朋友圈，成交更快更简单！

制糖业脱色树脂（精制糖）进口杜笙（Tulsion）A-72MP
制糖业脱色树脂（精制糖）
Tulsion® A-72 MP ISO-9001/ISO-14001/OHSAS-18000
具有控制孔径的大孔强碱性Ⅰ型阴离子交换树脂
Tulsion® A-72 MP 是一款具有便于颜色和有机物去除的控制孔径的，开发的大孔强碱性Ⅰ型阴离子交换树脂。
Tulsion® A-72 MP（氯型）应用于糖浆脱色。
Tulsion® A-72 MP 由于其本身的大孔特性而显示出了的物理特性和化学稳定性，适合于在广泛的PH范围内和温度条件下使用。
典型特性（TYPICAL CHARACTERISTICS）： Tulsion A-72 MP
型式/Type 大孔强碱性阴离子交换树脂
主体结构/Matrix structure 聚苯乙烯共聚物/Polystyrene copolymer
物理型式/Physical form 含水球状/Moist spherical beads
官能基/Functional group I型季胺官能基/Quaternary Ammonium Type I
离子型式/Ionic form 氯/Chloride
总交换树脂( meq/ml ) 1.0 meq/ml
目数/Screen size USS (湿) 16 to 50
粒度/Particle size(95% minm.) 0.3 - 1.2 mm
湿度/Moisture content 67±3%
PH 范围/pH range 0 - 14
温度 80℃（175℉）
溶解性/Solubility 不溶于任何容积
反冲洗浓度比 700 - 750 g/l
膨胀系数/Swelling(approx.) Cl- 到 OH- 20%
操作条件特性TYPICAL OPERATING CONDITIONS Tulsion A-72 MP
操作温度/Maximum operating temperature 175℉ (80℃)
树脂床小高度/Resin bed depth minm. 24'' (600 mm)
流速/Maximum service flow 7.5gpm/ft³ (60m³/hr/m³)
逆洗膨胀空间/Backwash expansion space 50 - 70%
逆洗膨胀流速/Backwash expansion flow rate (25℃) 5-10m³/hr/m³
再生剂/Regenerant NaOH
再生剂用量/Regeneration level 40-160g NaOH /L
再生剂浓度/Regenerant concentration 4%-8% NaOH
再生时间/Regeneration time 15-60 mins
冲洗流速/Rinse flow rate : slow 再生流速
Fast 工作流速
冲洗量/Rinse volume 4-10 m³/ m³
游离氯/Free chlorine 无
浊度/ Turbidity < 2 NTU
铁和重金属/Iron and heavy metals < 0.1 ppm
测试（TESTING）： Tulsion A-72 MP
离子交换树脂的抽样和测试是按标准的测试程序，即ASTMD - 2187和IS - 7330，1998.
包装（PACKING）： Tulsion A-72 MP
Super Sack 1000 lit Super Sack 35 cft
MS drums 180 lit. MS drums 7 cft
HDPE lines Bags 25 lit. HDPE lines Bags 1 cft
For Handling, Safety and Storage requirements please refer to the individual Material Safety Data Sheets available at our offices. The data included herein are based on test information obtained by Thermax Limited. These date are believed to be reliable, but do not imply any warranty or performance guarantee. Tolerances for characteristics are per BIS/ASTM. We recommend that the user should determine the performance of the product by testing on his own processing equipment.
For further information, please contact:：